75m Lattice Truss for Leicester City Training Ground

75m Lattice Truss for Leicester City Training Ground

75m Lattice Truss for Leicester City Training Ground

BHC Fabricate 75m Lattice Truss for Leicester City Training Ground

The indoor football pitch at Leicester City Training Ground comprises of a Square Hollow section diagrid spanning between a series of SHS Arched Lattice Trusses.

The lattice truss consists of 4 sections that span 75m (2.2 to 3.9m deep) between reinforced concrete buttress walls with concealed bolted connections between each section. 3 x 110mm diameter pins are used to connect the 4 main bottom boom sections of the truss. Each lattice truss weighs 23.5 tonnes.

The main roof steelwork of the covered pitch is exposed, and all connections were meticulously detailed with concealed bolting to meet the architectural requirements. A temporary central trestle will be required during the erection and levelling of the trusses.

Leicester City Truss

75m Lattice Truss Leicester City Training Ground

75m Lattice Truss - Leicester Training Ground

75m Lattice Truss - Leicester City Training Ground

75m Lattice Truss - Leicester City Training Ground

Buchanan Wharf

Buchanan Wharf Takes Shape

Buchanan Wharf

Buchanan Wharf continues to dramatically change Glasgow’s Riverfront.

The Drum Property development includes a 7-storey and a 10-storey office block, comprising of over 320,000ftof Grade A office space.

Building One and Building Two are now being erected simultaneously with Building One achieving its full height within numerous zones. The steel frame of Building Two began to take shape in July and is rapidly gaining height.

Throughout the project, BHC are supplying, fabricating and erecting over 4,000 tonnes of steelwork across the two offices. In addition to the steelwork, BHC are installing 31,673m2 of metal decking topped with 4,320m3 of concrete reinforced with 309 tonnes of reinforcement.

The latest images from site:

Buchanan Wharf, Glasgow

Buchanan Wharf, Glasgow

Buchanan Wharf, Glasgow

University of Glasgow – Learning & Teaching Hub

University of Glasgow - Learning and Teaching Hub - Bridge

BHC Erect Bridges at the University of Glasgow

BHC erected two Link Bridges at the University of Glasgow over the weekend of 31st August – 1st September.

The bridges – weighing 12 tonnes each – connect the existing Boyd Orr Building to the new £90.6 million James McCune Smith Learning Hub.

An LTM 1540-8.1 Mobile Crane with a maximum capacity of 450 tonnes was used to move the bridges into place.

The James McCune Smith Learning Hub will accommodate over 2,500 students and houses state-of-the-art learning and teaching facilities. This includes lecture halls, interactive teaching spaces, group study spaces and a café.

Images of the bridges being erected can be found below:

University of Glasgow - Learning and Teaching Hub

University of Glasgow - Learning and Teaching Hub

University of Glasgow - Learning & Teaching Hub

University of Glasgow - Learning & Teaching Hub

University of Glasgow - Learning & Teaching Hub

Apprentices Awarded BCSA CRAFT Certificate - Feature

Apprentices Awarded BCSA CRAFT Certificate

Apprentices Awarded BCSA CRAFT Certificate

Four BHC Apprentices have been awarded the British Constructional Steelwork Association (BCSA) CRAFT Certificate. 

Over the past four years, the apprentices – Steven Barclay, Sam Baverstock, Mark Ewart and Connor Morrison – undertook a variety of training modules with the assistance of their coaches. The monitoring of the training and final confirmation of the module tests were validated by our in-house BCSA Registered Validators, Jimmy Cowan (Registered Welding Coordinator), Brian Edwards (Production Process Engineer) and Richie Struthers (HSQE Manager).

Apprentices Awarded BCSA CRAFT Certificate

BHC continues to invest heavily in the apprentices we employ and recently welcomed 20 new first-year apprentices into the company.

The BCSA CRAFT Apprenticeship is a key element to the company’s ongoing success and we are proud to recognise the importance of apprenticeships within the Steel Construction Industry.

BHC host an Annual Apprentice Open Day each Summer with the intent of hiring between 10-20 new apprentices.

Over the past six years, Routes to Work South have supported BHC with the funding of Health & Safety training and salary funding.

Leicester City Training Centre

Leicester City Training Centre

LCFCBHC Are On-Site at the New Leicester City Training Centre.  

 McLaren Construction have appointed BHC to supply, fabricate and erect over 1,640 tonnes of structural steelwork and 5,500mmetal decking for the new Leicester City Training Centre.

BHC also secured the concrete package consisting of 995mof concrete on top of the upper floor slabs, over a surface area of 6,807m with 84 tonnes of reinforcement.

The new £120 million state-of-the-art training centre features an impressive, full-sized in-door training pitch that blends seamlessly into the landscape. The main structure will be surrounded by 11 full-size pitches and an indoor facility building which includes; 35 bedrooms, a rehabilitation facility, a hydrotherapy pool and catering area for Leicester City’s Academy and First team.

The project has been designed to support biodiversity within the area; 17 new ponds will be created to attract wildlife whilst managing surface water drainage. Additionally, over 38,000 new trees will be planted within the local surrounding area as well as 4.4 hectares of planting and landscaping and 14.6 hectares of wildflower grassland.

The training centre is set to be one of the most advanced in Europe and will open mid-2020.

LCFC

LCFC

LCFC

*Images courtesy of Leicester City Football Club.

ESJ - Site Team

The Edinburgh St James Site Team

The Edinburgh St James Site Team A recent shot from last month of the BHC squad working on-site at Edinburgh St James.

Congratulations!

Ross Henderson - Congratulations

Congratulations and all the best to Ross Henderson as he begins his new role as Fabrication Foreman within BHC.

Ross joined BHC 17 years ago as an Apprentice Plater. After becoming time served, he progressed into the role of Plater and Line Leader before successfully being appointed as a Fabrication Foreman.

Ross Henderson